Storlink devices community

Hi, I just bought this NAS from Verbatim and installed into it Transmission client for the MRT nas, it works flawlessly! Service installation file structure is the same.
Can this be a compatible storlink nas device? I can't open the device to double check cause it's brand new and don't want to invalidate warranty.

Seems to be a Storlink device (3316 or 3516??), more info here:
http://www.mpcclub.com/forum/showthread.php?t=13224
or here: http://forum.hardware.fr/hfr/Hardwa...et_802962_2.htm
So it's compatible, more about specs needed (10/100 or gigabit, ram quantity, ecc...)

Thanks for the info!

In the first link the user says "The NAS has a hidden menu to enable telnet. This helps a lot to make tests."
I guess I'll have to find out which page he refers to, given that I can't access it by ssh atm. Ssh access will open a new world.

For the specs, these are the only that I found on th Verbatim user guide :

10/100/1000 gigabit ethernet,
1TB hard disk,
2 usb 2.0 ports,
dedicated fan for cooling

supported services:

print server,ftp,smb,NFS, twonkymedia mediaserver, bonjour, itunes 8, bittorrent, dhcp server.

ps (ita): Romano de roma eh? ehehe pure io.

Ok I found how to enable telnet:

connect to webapp with admin priviledges, then put this url in: http://192.168.1.2/cgi/telnet/telnet.cgi (assuming 192.168.1.2 is your device ip)

then you can enable telnet acces on a custom or the default port.

But now another problem, root password is set and unknown... anybody knows a trick to clear and re-set root password on a busybox?

Btw I can confirm it's a storlink based device from boot file in rc.d referring to various storlink driver modules!

Some hw info I gathered:
Memory : 64mb
Processor : FA526id(wb) rev 1 (v4l)
Hardware : GeminiA
Linux version 2.6.15 (root@sw-server) (gcc version 3.4.4)

treyguitar wrote: [View Post]

Ok I found how to enable telnet:

connect to webapp with admin priviledges, then put this url in: http://192.168.1.2/cgi/telnet/telnet.cgi (assuming 192.168.1.2 is your device ip)

then you can enable telnet acces on a custom or the default port.

But now another problem, root password is set and unknown... anybody knows a trick to clear and re-set root password on a busybox?

Btw I can confirm it's a storlink based device from boot file in rc.d referring to various storlink driver modules!

Some hw info I gathered:
Memory : 64mb
Processor : FA526id(wb) rev 1 (v4l)
Hardware : GeminiA
Linux version 2.6.15 (root@sw-server) (gcc version 3.4.4)

Ok, so it's a Storlink 3516 based nas... for telnet try here: http://memoriedigitali.com/storlink...&highlight=root
It's must be the same thing of mrt nases, also telnet enabling method it's the same of mrt ones.

p.s. daje che della capitale siamo ben pochi da ste parti...

Thanks for the hint, I'll try that. Although seems strange that I can alter /etc/passwd file as Admin user, as I remember I got read only permission on that file and owner is root. I'll check into that!

Anyway, I tried to install mldonkey server for mrt (found on embedded devices) but installation is a bit tricky, it stopped rTorrent service and didn't create any webadmin page to enable it but I found a work-around.
I installed and then uninstalled it, after that it disappears from web admin services page listing but all installation files are still there in (/usr/bin/mldonkey or something like that), and transmission is working again... now I'm able to launch mldonkey from telnet and use it with sancho.

Cya for the next discovery on this device :mrgreen:

No need to edit passwd file... root password is same as admin's! I just didn't tried that... noob move :oops:
Gained root access now! :mrgreen:

Just both one, TF is pretty fast and general performance for a 130€ NAS are good. The fan is deafening.. I'm looking forward to install some additional service, like MLDonkey, Do I need to take some precautions before installing MRT services?